QUESTION
I've tried twice to rebuild an Esprit S4 water pump and it keeps leaking through the seep hole, frustrating...
If I buy your water pump rebuild kit will it come with assembly instructions?
Alternatively, how much would it be to have you rebuild the water pump for us?
S.M. - Italy
ANSWER
Sorry to disappoint you but Lotus Marques does not sell a stand-alone water pump kit - for good reason.
The components used during a water pump rebuild includes a mechanical seal that has a different installed height compared to the original.
It is necessary to dummy assemble the pump to determine how much material has to be machined off the impellor thrust face.
Making this critical measurement also allows manufacturing errors/tolerances to be compensated for when setting up the correct seal installed height.
For this reason, Lotus Marques offers a comprehensive rebuild service where the pump is pressure tested to 50psi and returned to the customer with a two year warranty.
It is apparent that other Lotus specialists offer rebuild kits but these do not guarantee a quality result.
Evidence of this is the steady stream of pumps reaching our workshop that have failed shortly after being recently rebuilt.
Whilst pumps are a simple component, folk still struggle to rebuild these items correctly and an example of this can be viewed here.
Providing a pump is in good condition with no corrosion or mechanical problems, it can usually be rebuilt for AUS $150.00
If any other problems are discovered that require rectification, this will be at additional cost.
Copyright © 2014 Lotus Marques
I've tried twice to rebuild an Esprit S4 water pump and it keeps leaking through the seep hole, frustrating...
If I buy your water pump rebuild kit will it come with assembly instructions?
Alternatively, how much would it be to have you rebuild the water pump for us?
S.M. - Italy
ANSWER
Sorry to disappoint you but Lotus Marques does not sell a stand-alone water pump kit - for good reason.
The components used during a water pump rebuild includes a mechanical seal that has a different installed height compared to the original.
It is necessary to dummy assemble the pump to determine how much material has to be machined off the impellor thrust face.
Making this critical measurement also allows manufacturing errors/tolerances to be compensated for when setting up the correct seal installed height.
For this reason, Lotus Marques offers a comprehensive rebuild service where the pump is pressure tested to 50psi and returned to the customer with a two year warranty.
It is apparent that other Lotus specialists offer rebuild kits but these do not guarantee a quality result.
Evidence of this is the steady stream of pumps reaching our workshop that have failed shortly after being recently rebuilt.
Whilst pumps are a simple component, folk still struggle to rebuild these items correctly and an example of this can be viewed here.
Providing a pump is in good condition with no corrosion or mechanical problems, it can usually be rebuilt for AUS $150.00
If any other problems are discovered that require rectification, this will be at additional cost.
Copyright © 2014 Lotus Marques
