QUESTION
I am gradually making progress with my Esprit S2 restoration but I haven't had much luck getting the aluminium pipes bent that run through the chassis!
So far I have made 4 attempts and the pipe keeps splitting.
I suspect it needs to be heated.
I'm now thinking of making them out of 316 Stainless.
Heavier but in theory should work just as well. Any thoughts?
R.P. - Brunswick, Melbourne, Australia
ANSWER
If you are experiencing problems trying to bend thin wall tubing, then here is a quick metalworking explanation.
In order to be able to bend any metal particularly tubing, its necessary to select the correct material/alloy.
This requires obtaining the manufacturers specification sheet.
There numerous types of different aluminium and steel alloys available, all with their own characteristics.
To bend aluminium it is essential to know how is was manufactured and in what form it is supplied.
If the material is cold rolled then most likely it will be "hard and brittle".
In this form it is unsuitable to be folded or bent and requires annealing.
This process is carried out by gently heating the aluminium to approximately 150 degrees Centigrade.
The former and method to bend any tubing is important so as to reduce distortion and cracking etc.
So to achieve a quality result with the minimum of distortion, the correct approach and equipment are needed.
From experience 316 stainless steel is not suitable to be bent very easily.
This is a marine grade stainless alloy and has a high chrome alloy content that makes it brittle.
From many years of experience, tubing bending is probably best left to the experts.
Copyright © 2016 Lotus Marques
I am gradually making progress with my Esprit S2 restoration but I haven't had much luck getting the aluminium pipes bent that run through the chassis!
So far I have made 4 attempts and the pipe keeps splitting.
I suspect it needs to be heated.
I'm now thinking of making them out of 316 Stainless.
Heavier but in theory should work just as well. Any thoughts?
R.P. - Brunswick, Melbourne, Australia
ANSWER
If you are experiencing problems trying to bend thin wall tubing, then here is a quick metalworking explanation.
In order to be able to bend any metal particularly tubing, its necessary to select the correct material/alloy.
This requires obtaining the manufacturers specification sheet.
There numerous types of different aluminium and steel alloys available, all with their own characteristics.
To bend aluminium it is essential to know how is was manufactured and in what form it is supplied.
If the material is cold rolled then most likely it will be "hard and brittle".
In this form it is unsuitable to be folded or bent and requires annealing.
This process is carried out by gently heating the aluminium to approximately 150 degrees Centigrade.
The former and method to bend any tubing is important so as to reduce distortion and cracking etc.
So to achieve a quality result with the minimum of distortion, the correct approach and equipment are needed.
From experience 316 stainless steel is not suitable to be bent very easily.
This is a marine grade stainless alloy and has a high chrome alloy content that makes it brittle.
From many years of experience, tubing bending is probably best left to the experts.
Copyright © 2016 Lotus Marques
