QUESTION
I have a couple of oil leaks on my 88 Esprit Turbo I need to repair.
Myself and my friend (who is a mechanic) have located an oil leak which appears to be coming the RH drive-shaft seal and what we believe is a camshaft seal.
We were wondering if seals may be sourced locally or if I would need to order from a specialist, i.e, yourselves.
Whilst under the car we also noticed the bracket for the fuel pump was quite rusty and no longer supporting the pump.
The front passenger side engine mount had collapsed (Pink spot I believe).
Is it possible to change this without removing the engine?
Any advice and help you could give us on these issues would be appreciated as we are both new to the Lotus game and understand they aren't like ordinary cars and we are keen to get things right.
My Lotus Esprit is also a UK import, so it has the Renault gearbox if this is of any consequence?
Should the cam belt have a guard or cover on it?
I haven't been able to find any information on this and it has me a little nervous.
J.W. - Adelaide, South Australia
ANSWER
The Renault gearbox output shaft seals are a proprietary seal that Lotus Marques usually stocks.
When the seals are changed, the roll pins that secure drive-shaft to the output shaft should be changed.
There are a pair of roll pins and the smaller diameter component is located inside the other.
From experience these are prone to cracking and/or breaking.
The new pins should be installed with Loctite 587 to prevent gearbox oil moving up the shaft splines and exiting via the ends of the roll pins.
I assume you have the standard electric fuel pump mounted on the engine side of the fire-wall (located behind the passenger seat RHD Esprit)
Can you please email a photo of the corroded fuel pump bracket so the correct replacement can be supplied.
It is possible to replace the engine mount without removing the engine.
Be sure to check there is a top limit washer and rebound washer located either side of the engine mount.
From experience, the lower rebound washer upper rubber face usually suffers and subsequently wears.
If the upper rubber face on the lower rebound washer is damaged then it should be replaced.
If your Esprit turbo is a UK import with a Renault gearbox, then it will be fitted with twin Dellorto carburettors.
Your Lotus Esprit engine was not fitted with a cam belt guard as standard equipment.
However it is important to check the engine under-tray is still installed as this prevents stones being thrown up from the road and damaging the cam belt.
Copyright © 2013 Lotus Marques
I have a couple of oil leaks on my 88 Esprit Turbo I need to repair.
Myself and my friend (who is a mechanic) have located an oil leak which appears to be coming the RH drive-shaft seal and what we believe is a camshaft seal.
We were wondering if seals may be sourced locally or if I would need to order from a specialist, i.e, yourselves.
Whilst under the car we also noticed the bracket for the fuel pump was quite rusty and no longer supporting the pump.
The front passenger side engine mount had collapsed (Pink spot I believe).
Is it possible to change this without removing the engine?
Any advice and help you could give us on these issues would be appreciated as we are both new to the Lotus game and understand they aren't like ordinary cars and we are keen to get things right.
My Lotus Esprit is also a UK import, so it has the Renault gearbox if this is of any consequence?
Should the cam belt have a guard or cover on it?
I haven't been able to find any information on this and it has me a little nervous.
J.W. - Adelaide, South Australia
ANSWER
The Renault gearbox output shaft seals are a proprietary seal that Lotus Marques usually stocks.
When the seals are changed, the roll pins that secure drive-shaft to the output shaft should be changed.
There are a pair of roll pins and the smaller diameter component is located inside the other.
From experience these are prone to cracking and/or breaking.
The new pins should be installed with Loctite 587 to prevent gearbox oil moving up the shaft splines and exiting via the ends of the roll pins.
I assume you have the standard electric fuel pump mounted on the engine side of the fire-wall (located behind the passenger seat RHD Esprit)
Can you please email a photo of the corroded fuel pump bracket so the correct replacement can be supplied.
It is possible to replace the engine mount without removing the engine.
Be sure to check there is a top limit washer and rebound washer located either side of the engine mount.
From experience, the lower rebound washer upper rubber face usually suffers and subsequently wears.
If the upper rubber face on the lower rebound washer is damaged then it should be replaced.
If your Esprit turbo is a UK import with a Renault gearbox, then it will be fitted with twin Dellorto carburettors.
Your Lotus Esprit engine was not fitted with a cam belt guard as standard equipment.
However it is important to check the engine under-tray is still installed as this prevents stones being thrown up from the road and damaging the cam belt.
Copyright © 2013 Lotus Marques
