Lotus twin cam engine parts, page 2 |
||||
Image | Description | Part Number | Comments | Price plus GST |
Oil filler cap and threaded insert | This oil filler cap should not be confused with cheaper copies that incorporate an external helical groove for the original locking pins to engage in. This will cause metal shavings to enter twin cam engine. For further information see the product data-sheet here | $157.50 | ||
Crankshaft front oil lip seal | A026E6022 | Double lip seal for extended service life. Install with Wellseal | $9.00 | |
Crankshaft rear oil lip seal | 2724E6701A | Double lip seal for extended service life. Install with Wellseal | $9.15 | |
Crankshaft rear oil seal housing | 026E0384 | Used | $15.75 | |
Elan S1/2 rear oil seal housing gasket | 105E6369 | $6.25 | ||
Elan S3/4 rear oil seal housing gasket | 2730E6344A | $6.25 | ||
Crankshaft sprocket | X026E0015 | $78.75 | ||
Crankshaft woodruff key | A026E6033 | $8.95 | ||
Crankshaft oil slinger | X026E0326A | TBA | ||
Steel flywheel and ring gear to suit Datsun crankshaft | $393.75 | |||
Starter ring gear, 110 teeth | lead-in cut on both sides of ring gear teeth Weighs 650grams (1lb 7oz) |
$119.35 | ||
Forged piston set, 83.5mm with 0.25”intruder (12.5:1 comp) | $822.10 | |||
Cast piston set, 82.55mm, 83.5mm, 85mm (compression height = 39.5mm) | $727.30 | |||
Cast piston set, 82.55mm, 83.5mm, 85mm (compression height = 37.13mm) | $727.30 | |||
Conrod set, Farndon | $1200.00 | |||
ARP con rod bolt, 1.50” long, 220,000psi, set of 8 | $90.00 | |||
ARP con rod bolt, 1.75” long, 220,000psi, set of 8 | $90.00 | |||
ARP flywheel bolt Ford/Lotus – set of 6 | $52.16 | |||
ARP flywheel bolt Datsun – set of 5 | $40.00 | |||
ARP cylinder head bolt kit - 12-Point heads. | $160.00 | |||
Cylinder head/chest bolt – long | 026E0029 | $3.95 | ||
Cylinder head/chest bolt – short | XUCS 0516 | $1.60 | ||
Race composite head gasket 84mm, 85mm, 86mm, 88mm | $95.10 | |||
1.625” inlet valve x 5/16” stem, EN214N | $37.00 | |||
1.625” inlet valve x 9/32” stem, EN214N | $37.00 | |||
1.700” inlet valve x 9/32” stem, EN214N | $37.00 | |||
1.400” exhaust valve x 5/16” stem, EN214N | $37.00 | |||
Standard valve collet 5/16” stem | $3.00 | |||
Valve spring kit @ 0.450” lift (inc springs, collets, retainers) | $125.00 | |||
Valve spring kit @ 0.500” lift (inc springs, collets, retainers) | $185.00 | |||
Valve guide bronze | $24.65 | |||
Valve circlip | 026E6018 | $2.15 | ||
Exhaust valve seat 1.5” OD x 1.2” ID x 0.353” high | 12.60 |
|||
Inlet valve seat 1.640” OD x 1.3” ID x 0.423” high | $14.20 |
|||
Engine mounting spacer, 1.125" | X026E0375 | Four spacers required per exhaust side engine mount - supplied as a set | $40.00 | |
Engine mounting spacer, 0.875” – special 711M block | Four spacers required per exhaust side engine mount - supplied as a set | $38.00 | ||
Engine mounting spacer bolt, N/S | $1.35 | |||
Engine mounting spacer bolt, O/S | $1.35 | |||
Washer, engine mounting bolt | $0.25 |